Operation Manual

Changing the door hinging
The appliance is supplied right hand
hinged. If you want it left hand hinged
follow the instructions below.
Open the appliance door.
Use a screwdriver to lever the plinth
facia
b out, then pull it forwards and
off.
Use a screwdriver to remove cover
c then close the door.
Remove screw d completely.
Pull door support e together with
hinge pin
f downwards, then tilt it
forwards and take it off.
Open the appliance door, move it
downwards and take it off.
Unscrew the upper hinge pin b
using the spanner supplied and refit
on the opposite side.
Remove spacer c with a screwdriver
and refit it on the opposite site.
Remove plugs d from door bearing
bushes in the door and refit on the
opposite side.
Hang the door in hinge pin b (re-
member to use the washers
e), then
close the door.
Changing the door hinging
23