Operation Manual

Turn door support c around, pull the
hinge pin
b out, and refit it on the
opposite side.
Fit both parts into hinge plate g. To
do this push hinge pin
b through
hinge plate
g into the door support
c. Swing door support out, push up-
wards and re-assemble with screw
d.
Align the door using the long slot in
hinge plate
g with the appliance
housing. Then tighten screw
d.
Refit plinth facia e, pushing it firmly
into position.
With the door open, secure cover f
to the front of the plinth facia.
Open the appliance door.
Unclip covers j at the front and
slide off to the side.
Unscrew handle h, and remove
stoppers
i. Refit on the opposite
side of the door.
Slide covers j into position, making
sure they click into position correctly.
Changing the door hinging
24