Operating instructions/Installation instructions

Switching on and off
20
Switching on
 Press the On/Off button.
The appliance will start to cool and the
temperature required will appear in the
temperature display. The interior lighting
will come on when the door is opened.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Switching off
 Press the On/Off button until the
display goes out.
If this does not happen, the safety
lock is still activated (see "Selecting
further settings - To deactivate the
safety lock).
The interior lighting will go out and the
cooling process will be switched off.
Switching off for longer
periods of time
If, during a long absence, the
refrigeration appliance is switched off
but not cleaned and the door(s) left
shut, there is a risk of mould forming
inside the appliance.
It is essential to clean the
refrigeration appliance.
If the refrigeration appliance is not
going to be used for a longer period of
time, observe the following:
 Switch the refrigeration appliance off.
 Switch off at the wall socket and
withdraw the plug from the socket, or
disconnect the fuse.
 Defrost the freezer compartment
(depending on model).
 Clean the refrigeration appliance and
leave the door ajar to air the
appliance and avoid odours building
up inside.