Operation Manual

Problem solving guide
41
Problem Cause and remedy
The compressor is
switching on more fre-
quently and for longer
periods of time, so the
temperature in the ap-
pliance is dropping.
The temperature setting is too low.
 Adjust the temperature.
The freezer compartment door (depending on model)
is not closed properly.
 Make sure that the freezer compartment door (de-
pending on model) is closed properly.
A large amount of food is being frozen at once.
 See "Freezing and storing food".
The Super cool function is still switched on.
 You can switch off the Super cool function earlier
to save energy:
Press the Super cool button.
The compressor comes
on less and less often
and for shorter periods
of time. The temperat-
ure in the appliance
rises.
This is not a fault. The temperature is too high.
 Adjust the temperature.
 Check the temperature again after 24 hours.
The food begins to defrost.
The room temperature is lower than the ambient tem-
perature for which the appliance is designed.
Operating in a room which is too cold will cause the
compressor to switch off for too long, causing the
freezer compartment to become too warm.
 See "Installation - Location".
 Increase the temperature of the room.
An LED indicator light is
flashing at the back of
the appliance at the
bottom near the com-
pressor (depending on
model).
This is not a fault. The electronic unit for the com-
pressor is equipped with an operation and fault dia-
gnosis LED indicator light which flashes every 15
seconds (depending on model).