Operation Manual

Installation
50
Before installing the appliance
 Take the accessory pack which in-
cludes installation parts and other ac-
cessories out of the appliance and re-
move the packaging strap holding the
door in place.
 Do not remove the following from
the back of the appliance:
– The spacers (depending on model).
These ensure the gap required
between the back of the appliance
and the wall is maintained.
– Depending on model, the pouches
located in the metal grille (heat ex-
changer).
They are required for the correct
functioning of the appliance. The
contents are not poisonous or dan-
gerous.
 Remove the cable clip from the back
of the appliance.
 Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
 Open the appliance door and remove
the red safety catch  (depending on
model).