Operation Manual

Installing the appliance
61
Preparing the appliance
 Position the appliance in front of the
housing unit.
 Fit cover strip  into position.
 Screw fixing bracket  into the pre-
drilled holes in the appliance door us-
ing hexagonal screw .
 Screw a second pair of fixing brack-
ets securely  into the handle area of
the door. Use the pre-drilled holes in
the appliance door.
 Push the appliance two-thirds of the
way into its niche. When doing this,
make sure that the mains cable does
not get trapped.
Tip: To help you push it into position, tie
a piece of string around the plug to "in-
crease" the length of the connection
cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the ap-
pliance is in the unit.