User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super cool and DynaCool
- Selecting further settings
- Explanation of the different settings
- Party mode
- Holiday mode
- Switching on the lock function /
- Briefly deactivating the lock function /
- Switching off the lock function /
- Sabbath mode
- Switching Sabbath mode on
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Adjusting the volume of alarms and buzzers /
- Adjusting the display brightness
- Switching off demo mode
- Resetting the settings to their default settings
- Information
- Charcoal filter change indicator
- Cleaning mode
- Explanation of the different settings
- Door alarm
- Storing food in the refrigerator section
- Storing food in the DailyFresh drawer
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
Guide to the appliance
28
Selecting the desired function in Settings mode
Touch the OKsensor control on the control panel.
will appear in the display.
Use the or sensor control to scroll to the symbol.
Touch OK.
Select the function you want using the or sensor control.
Touch OK to select the function you want.
When the function is switched on, a dot appears in the upper corner of the dis-
play
.
Touch OK to deselect a selected function.
When the function is switched off, the dot in the upper corner of the display goes
out.
Exiting Settings mode
Use the or sensor control to scroll to the symbol.
Touch OK.
Use the or sensor control to scroll to the symbol and touch OK.
Alternatively:
Wait approx. 15seconds after the last press of a button.
Settings mode is then exited automatically.