User manual

Guide to the appliance
29
Adjusting the interior fittings
Moving the door shelf/bottle shelf
Only move the door/bottle shelves in
the appliance door when they are
empty.
 Push the door/bottle shelves up-
wards, then remove them by pulling
them forwards.
 Replace the door/bottle shelves at
the required height.
Clipping the egg trays on
 Clip the egg trays onto the rear edge
of the door shelf.
Adjusting or removing the bottle
holder
The non-slip fins of the bottle holder
make bottles more secure when you
open and close the appliance door.
The bottle holder can be moved to the
left or right to create more room for
drink cartons.
The bottle holder can be removed com-
pletely, e.g. for cleaning:
 pull the bottle holder up to remove it.
Moving the adjustable shelves
The adjustable shelves can be adjusted
according to the height of the food.
 Raise the shelf slightly at the front
and pull it forwards a little.
 Lift the shelf until the notches at the
side are in line with the shelf supports
to raise or lower it to the required
level.
 Push the shelf in.
Stoppers prevent the shelves from be-
ing dislodged by mistake.
The raised edge on the protective strip
at the back must face upwards to pre-
vent food from touching the back of
the appliance and freezing to it.