User manual

Guide to the appliance
30
Moving the bottle rack
The bottle rack can be placed at differ-
ent positions in the refrigeration appli-
ance.
 Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to pre-
vent bottles from touching the back of
the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
Space for a baking tray
A baking tray can be placed above the
drawers. The baking tray can be no
more than 466mm wide, 386mm deep
and 50mm high.
 Open the appliance door as far as it
will go.
 Place the baking tray on the dividing
plate.
Tip: Let the baking tray cool down to
room temperature before putting it in
the refrigerator section.