User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super cool and DynaCool
- Selecting further settings
- Explanation of the different settings
- Party mode
- Holiday mode
- Switching on the lock function /
- Briefly deactivating the lock function /
- Switching off the lock function /
- Sabbath mode
- Switching Sabbath mode on
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Adjusting the volume of alarms and buzzers /
- Adjusting the display brightness
- Switching off demo mode
- Resetting the settings to their default settings
- Information
- Charcoal filter change indicator
- Cleaning mode
- Explanation of the different settings
- Door alarm
- Storing food in the refrigerator section
- Storing food in the DailyFresh drawer
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
The correct temperature
36
Temperature display
In normal operation, the temperature
display shows the current average
fridge zone temperature.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this tem-
perature to then be shown as a con-
stant temperature on the display.
Setting the temperature
Touch the OKsensor control on the
control panel.
will appear in the display.
Touch OK.
Use the andsensor controls to
change the temperature.
Touch OK.
The temperature display changes back
to the actual temperature that is cur-
rently in the refrigeration appliance.
Possible temperature settings
- Fridge zone: 2to9°C
If you change the temperature set-
ting:
check the temperature display after a
few hours. It will take this long for the
appliance to give an accurate read-
ing.
- Wait for approx.6hours if the refri-
geration appliance is not very full
- Wait for approx.24hours if the refri-
geration appliance is full
If, after this time, the temperature is still
too high or too low:
Adjust the temperature again.