User manual

Using Super cool and DynaCool
37
SuperCool
When switched on, the SuperCool
function can be used to rapidly re-
duce the temperature in the fridge
zone to its lowest setting (depending
on the ambient temperature). The refri-
geration appliance will work at full
power and lower the temperature. Se-
lect this function for the rapid chilling
of large amounts of fresh food or
drink.
When the SuperCool function is
switched on, the appliance may make
more noise than usual.
The SuperCool function should be
switched on 4hours before placing
food or drinks in the fridge zone.
The SuperCool function will switch
itself off automatically after approx.
12hours. The refrigeration appliance
will then run at normal power again.
Tip: To save energy, you can switch the
SuperCool function off yourself once
food and drinks are sufficiently chilled.
Switching SuperCool on and off
 Touch the OKsensor control on the
control panel.
 will appear in the display.
 Touch OK.
 Use the sensor control to scroll to
the symbol.
 Touch OK.
When the SuperCool function is
switched on, a dot appears in the up-
per corner of the display

.
 Use the sensor control to scroll to
the temperature you want and touch
OK.