User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super cool and DynaCool
- Selecting further settings
- Explanation of the different settings
- Party mode
- Holiday mode
- Switching on the lock function /
- Briefly deactivating the lock function /
- Switching off the lock function /
- Sabbath mode
- Switching Sabbath mode on
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Adjusting the volume of alarms and buzzers /
- Adjusting the display brightness
- Switching off demo mode
- Resetting the settings to their default settings
- Information
- Charcoal filter change indicator
- Cleaning mode
- Explanation of the different settings
- Door alarm
- Storing food in the refrigerator section
- Storing food in the DailyFresh drawer
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
Selecting further settings
44
Deactivating or activating the WiFi
connection
In Settings mode, use the or
sensor control to scroll to the
symbol.
Touch OK.
If the WiFi is deactivated, the symbol
will appear in the display.
To reactivate the WiFi connection,
touch OK.
If the WiFi is activated, the symbol
and a dot appear in the upper corner of
the display
.
When the WiFi connection is active, the
symbol appears in the start display.
Resetting the network configuration
In Settings mode, use the or
sensor control to scroll to the
symbol.
Touch OK.
Use the sensor control to scroll to
the symbol.
Touch OK.
Use the sensor control to scroll to
the symbol.
Touch OK.
All entered settings and values for
Miele@home are reset to the default
settings.
The WiFi connection has been deactiv-
ated, goes out in the start display.
Reset the network configuration if
you are disposing of or selling your
refrigeration appliance, or if you are
putting a used refrigeration appliance
into operation. All personal data is
removed from the refrigeration appli-
ance. This will also ensure that a pre-
vious owner is no longer able to ac-
cess the refrigeration appliance.
Adjusting the volume of alarms and
buzzers/
You can adjust the volume of alarms
and buzzers (e.g. in the event of a door
alarm or fault message). You can also
switch off the alarms and buzzers if
they disturb you.
In Settings mode, use the or
sensor control to scroll to the
symbol.
Touch OK.
Use the and sensor controls to
select the volume you want for
alarms and buzzers.
Touch OK.
appears in the display when the
alarms and buzzers are switched off.