User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super cool and DynaCool
- Selecting further settings
- Explanation of the different settings
- Party mode
- Holiday mode
- Switching on the lock function /
- Briefly deactivating the lock function /
- Switching off the lock function /
- Sabbath mode
- Switching Sabbath mode on
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Adjusting the volume of alarms and buzzers /
- Adjusting the display brightness
- Switching off demo mode
- Resetting the settings to their default settings
- Information
- Charcoal filter change indicator
- Cleaning mode
- Explanation of the different settings
- Door alarm
- Storing food in the refrigerator section
- Storing food in the DailyFresh drawer
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
Problem solving guide
63
Display warnings
Message Cause and remedy
lights up on the
display, the refri-
geration appli-
ance does not
get cold even
though the con-
trols and the in-
terior lighting are
working.
Demo mode has been activated.
Touch OK.
Miele will appear initially in the display, followed by
the start screen.
Touch OK.
In Settings mode, use the or sensor con-
trol to scroll to the symbol.
Touch OK.
After demo mode has been switched off, the refri-
geration appliance switches off and must be
switched on again.
is lit up in the
display and the
refrigeration ap-
pliance cannot
be used.
The Cleaning mode function is still switched on.
Touch the OKsensor control on the control panel
to switch off Cleaning mode.
will appear in the display.
TouchOK.
When Cleaning mode is switched off, the dot in
the upper corner of the display goes out.
Use the and sensor controls to scroll to the
symbol and touch OK.
The refrigeration appliance will start cooling again.
Nothing is visible on the
display. The display is
completely blank.
Sabbath mode is switched on: the interior lighting
is switched off and the refrigeration appliance is
cooling down.
TouchOK.
will appear in the display.
Touch OK.
When the Sabbath mode function is switched on, a
dot appears in the upper corner of the display
.
Touch OK.
When the Sabbath mode function is switched off,
the dot in the upper corner of the display goes out.