User manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Super cool and DynaCool
- Selecting further settings
- Explanation of the different settings
- Party mode
- Holiday mode
- Switching on the lock function /
- Briefly deactivating the lock function /
- Switching off the lock function /
- Sabbath mode
- Switching Sabbath mode on
- Switching Sabbath mode off
- Information on Sabbath mode
- Changing the time before the door alarm is triggered
- Miele@home
- Availability of the WiFi connection
- Miele@home availability
- Miele App
- Setting up Miele@home for the first time
- Deactivating or activating the WiFi connection
- Resetting the network configuration
- Adjusting the volume of alarms and buzzers /
- Adjusting the display brightness
- Switching off demo mode
- Resetting the settings to their default settings
- Information
- Charcoal filter change indicator
- Cleaning mode
- Explanation of the different settings
- Door alarm
- Storing food in the refrigerator section
- Storing food in the DailyFresh drawer
- Defrosting
- Cleaning and care
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
Problem solving guide
65
Message Cause and remedy
lights up in the
display and a
fault code F with
numbers may ap-
pear. An alarm
will also sound.
There is a fault.
Switch the alarm off by touching OK.
Call the Miele Customer Service Department.
To report the fault, you need the fault code and also
the model designation and serial number of your re-
frigeration appliance. You can access this informa-
tion in the display:
TouchOK.
The appliance data required will be shown on the
display.
TouchOK.
To switch off the refrigeration appliance, use the
or sensor control to scroll to the symbol.
To exit the information display, use the or
sensor control to scroll to the symbol.
TouchOK.
There is an appliance fault: this display always has
priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.