Operating and installation instructions Refrigerator K 9212 i K 9412 i To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. G M.-Nr.
Contents Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Bottle rack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Warning and Safety instructions . .
Contents Defrosting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Ice cubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cooling drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guide to the appliance a Refrigerator section temperature display b Super cool button and indicator light 4 c On/Off and temperature selector dial
Guide to the appliance a Freezer compartment* e Butter and cheese compartment b Adjustable shelves f Egg tray c Condensate channel and drain hole g Door shelf d Fruit and vegetable containers h Interior lighting i Bottle shelf j Bottle divider* * Depending on model 5
Guide to the appliance Optional accessories Bottle rack (depending on model) This bottle rack is available from the Miele Spare Parts Department or your dealer.
Caring for the environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Rather than just throwing these materials away, please ensure that they are recycled.
Warning and Safety instructions Correct application This appliance complies with all relevant legal safety requirements. Improper use of the appliance can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain important notes on the installation, safety, operation and care of the appliance.
Warning and Safety instructions Technical safety Before setting up the appliance, check it for any externally visible damage. Do not install and use a damaged appliance. This appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this environmentally friendly coolant has, however, led to a slight increase in the noise level of the appliance.
Warning and Safety instructions Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. This appliance may only be used in mobile installations such as ships etc. if a risk assessment of the installation has been carried out by a suitably qualified engineer.
Warning and Safety instructions If storing alcohol with a high percentage proof, make sure it is tightly closed and stored upright. Danger of explosion. Do not store cans or bottles containing carbonated drinks or liquids which could freeze in the freezer. The cans or bottles could explode. Danger of injury and damage to the appliance. When cooling drinks quickly in the freezer, make sure bottles are not left in for more than one hour, otherwise they could burst, resulting in injury or damage.
Warning and Safety instructions Disposal of your old appliance Before disposing of an old appliance, first make the door latch or lock unusable. This way you will prevent children from accidentally locking themselves in and endangering their lives. Before throwing an old appliance away, it must first be made unusable. Disconnect it from the mains, cut off the cable directly behind the appliance, and render any plug unusable. Be careful not to damage any part of the pipework whilst awaiting disposal, e.g.
How to save energy Normal energy consumption Increased energy consumption In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not situated near to a heat source (radiator, oven). Situated near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where there is a high ambient room temperature. Temperature setting with a thermostat which is approximate (set in stages). With a medium setting of 2 to 3.
How to save energy Defrosting 14 Normal energy consumption Increased energy consumption Defrost the freezer compartment when a layer of ice 0.5 cm thick has built up. A layer of ice hinders the cold from reaching the frozen food, and causes an increase in energy consumption.
Switching on and off Before using for the first time The stainless steel trim to the interior shelves and the door shelves have a layer of protective foil to prevent damage during transportation. ^ Clean the inside of the appliance and the accessories with luke warm water and a little washing-up liquid, and then dry with a soft cloth. ^ Carefully remove the protective foil from the stainless steel trim.
The correct temperature It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. micro-organisms become active in the food again so that it cannot be kept as long. For this reason, partially defrosted or defrosted food must not be re-frozen.
The correct temperature Temperature display The temperature display on the control panel always shows the required temperature. If you want the temperature in the refrigerator section to be 5 °C, ^ turn the temperature selector clockwise from 0 until the 5 lights up in the temperature display. The average temperature in the freezer section will then be approx. -18 °C. The temperature can be set slightly colder than the displayed temperature (e.g. between 5°C and 3 °C).
Super cool Super cool Switching off Super cool The Super cool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). The Super cool function will switch itself off automatically after approx. 6 hours. The indicator light will go out and the appliance will run at normal power again. Switching on Super cool Super cool is particularly recommended for faster chilling of large amounts of fresh food or drink.
Using the refrigerator efficiently Different storage zones Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance. Warmest area The warmest area is in the top section of the door. Use this for storing butter and cheese. Do not store explosive materials in the appliance or any products containing propellants (e.g.
Using the refrigerator efficiently When shopping for food Fruit and vegetables The freshness of food when first placed in the appliance is an important factor in determining how long it stays fresh. Time out of the refrigerator e.g. during transportation should be kept to a minimum. For example, do not allow food to stay in a hot car for too long. Once food has started to deteriorate, this process cannot be reversed. As little as two hours outside the refrigerator can cause food to start deteriorating.
Using the refrigerator efficiently Unpacked meats and vegetables Unpackaged meat and vegetables should be stored separately. To avoid any microbiological cross-contamination, these foods may only be stored together if they are wrapped. Protein rich foods Please note that foods rich in protein deteriorate faster than others. Shellfish, for example, deteriorates faster than fish, and fish deteriorates faster than meat. Meat Meat should be stored unwrapped.
Adjusting the interior fittings Moving the shelves The shelves can be adjusted according to the height of the food. ^ Raise the shelf, pull it forwards slightly, until the notch at the side is in line with the shelf support. It can then be raised or lowered to the required level. The raised edge at the back must face upwards to prevent food from touching the back of the appliance and freezing to it. Stoppers prevent the shelves from being dislodged by mistake.
Adjusting the interior fittings Moving the bottle divider (depending on model) The bottle divider can be moved to the left or right to ensure that bottles are held securely in position when the door is opened and shut. The bottle divider can be removed completely (e.g. for cleaning). ^ To do this, push up the front edge of the bottle divider, and disengage it.
Freezing and storing food (depending on model) Using the freezer compartment Storing frozen food Use the freezer compartment to: When buying frozen food to store in your freezer, check – store frozen food, – make ice cubes, – freeze small quantities of fresh food. – that the packaging is not damaged, – the use-by date, Freezing fresh food – the temperature at which the frozen food is being stored in the shop.
Freezing and storing food (depending on model) Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals.
Freezing and storing food (depending on model) Before placing food in the freezer compartment ^ Turn the temperature selector to a middle to low temperature for approx. 4 hours before placing fresh food in the freezer compartment. This helps food that is already in the freezer to stay frozen. Placing food in the freezer section ^ Place the food flat on the bottom of the freezer compartment so that it freezes through to the core as quickly as possible.
Freezing and storing food (depending on model) Ice cubes ^ Fill the ice tray three quarters full with water and place it on the bottom of the freezer compartment. ^ Once frozen, use a blunt instrument, for example a spoon handle, to remove the ice tray from the freezer. ^ Ice cubes can be removed easily from the tray by twisting the tray gently or by holding it under cold running water for a short while.
Defrosting Refrigerator section Freezer compartment The refrigerator defrosts automatically. (depending on model) Condensate and frost can build up on the back wall of the refrigerator section whilst it is in use. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the refrigerator. The freezer compartment does not defrost automatically because frozen food must not be allowed to defrost.
Defrosting To defrost Carry out the defrosting procedure as quickly as possible if food has not been placed in another freezer. The longer the food is left out at room temperature, the faster it defrosts. ^ Switch the appliance off at the wall socket and remove the plug. After defrosting ^ Clean the appliance, and then dry it thoroughly. Do not let water get into the condensate channel and drain hole. ^ Insert the plug in the appliance, and switch the appliance back on.
Cleaning and care Before cleaning Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents. "Non-abrasive" cleaning agents are also unsuitable as they can cause matt areas to appear. Make sure that water cannot get into the temperature selector or into the light. Do not let water get into the drainage channel and drain hole when cleaning. Do not use steam cleaning apparatus to clean the appliance.
Cleaning and care Ventilation gaps ^ The ventilation gaps should be cleaned on a regular basis with a brush or vacuum cleaner. A build up of dust will increase the energy consumption of the appliance. Door seal Do not use any oils or grease on the door seal as these will cause the seal to deteriorate and become porous over time. The door seals should be cleaned regularly with clean water, and then wiped dry with a soft cloth. After cleaning ^ Replace all shelves and accessories in the appliance.
Problem solving guide Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure that current is not supplied to the appliance until maintenance or repair work has been carried out.
Problem solving guide Operating in a room which is too cold will cause the cooling system to switch off for too long causing the freezer compartment to become too warm. . . . food has frozen together. Use a blunt instrument, e.g. a spoon handle or plastic scraper, to prise it apart carefully. . . . there is a thick layer of ice in the freezer compartment. ^ Grasp the lamp cover at the top and at the bottom (1), and pull it forwards to remove (2).
Problem solving guide . . . the floor of the refrigerator section is wet. The drain hole is blocked. ^ Clean the condensate channel and drain hole. If you still cannot remedy the fault having followed these suggestions, please contact the Miele Service Department. To prevent unnecessary loss of temperature it is advisable not to open the doors while waiting for the appliance to be serviced.
Noises Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrrr.... On multi-zone and frost-free appliances you can sometimes just hear the movement of air circulating inside the appliance.
After sales service In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – the Miele Service Department (see back cover for address). When contacting your Dealer or the Service Department, please quote the model and serial number of your appliance. This information is given on the data plate. Please note that telephone calls may be monitored and recorded for training purposes.
Electrical connection Electrical connection U.K. Non-rewireable plugs (BS 1363) All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The fuse cover must be re-fitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained.
Installation Ventilation This appliance must be built in, otherwise it could tip up. Location It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator. The appliance should be installed in a dry, well-ventilated room. The room temperature should not go above or below the climate range for which the appliance is designed. The higher the ambient temperature of the room, the more energy the appliance requires to operate.
Installation Before installation ^ Before installation remove the cover strip, sealing strip and other accessories out of the appliance and from the external rear wall of the appliance. ^ Remove any cable clips from the rear of the appliance. ^ On no account should the spacers be removed from the back of the appliance. These ensure the gap required between the back of the appliance and the wall is maintained. ^ Check that all parts at the back of the appliance are unhindered.
Building-in dimensions Niche height [mm] A K 9212 i 874 - 890 K 9412 i 1220 - 1236 40
Changing the door hinging Before building the appliance in, you will need to decide on which side the door is to be hinged. If left hand door hinging is required, follow the instructions below. To change the door hinging, you will need various sizes of Torx screwdrivers and a slotted screwdriver. Appliance door ^ Open the appliance door. The freezer compartment door now needs to be changed over if applicable (see following page). ^ Replace the appliance door on lower hinge pin e.
Changing the door hinging Freezer compartment door ^ Lower the cover on hinge plate a. ^ Unscrew hinge plate b, and remove freezer compartment door c together with the hinge plate. ^ Unscrew door catch d. ^ Screw door catch d into place on the opposite side, having turned it by 180 °. ^ Fit the freezer compartment door c in position at the top e, then tighten the hinge plate securely b. ^ Close the cover on hinge plate a. ^ Plug the holes with stoppers f.
Building in the appliance Preparing the appliance All building-in instructions given are for a right hand hinged appliance. If you have converted the appliance to left hand hinging you will need to adapt these instructions accordingly. Building into a peninsular run When built into a peninsular run, the rear of the building in niche must be fitted with a kitchen furniture panel. Aligning the housing unit ^ Slide cover strip a into the holder as shown, with the bumps facing downwards.
Building in the appliance Building in the appliance ^ Align the appliance height from above on both sides using adjusting screw f. ^ Plug the gap between the appliance and the furniture wall on the door opening side with sealing strip g. Press the sealing strip into the gap starting at the bottom, and cut to length so that it fits snugly to the lower edge of bracket b. ^ Remove cover a. ^ Secure bracket b with screws c (4.8 x 16 mm).
Building in the appliance Securing the appliance and fitting the furniture door ^ Replace cover a, and cap all the holes with stoppers l and m. ^ Secure door fixings n to the appliance door with screw o (3.9 x 9.5 mm), to suit the position of the handle, Very large doors will require several door fixings. ^ Open the doors right out, and push fixing guides p into door fixings n.
Alteration rights reserved / 5006 K 9212 i, K 9412 i M.-Nr.
