Operating and Installation Instructions Refrigerators To prevent accidents and machine damage, read these instructions before installation or use. en-US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 5 Caring for the environment .............................................................................. 14 Installation.......................................................................................................... Installation location ............................................................................................. Climate class ..................................................
Contents Before first use .................................................................................................. Choosing the right Door Assistant (Push2Open/Pull2Open) ........................ Inserting the Active AirClean filters ................................................................ Miele@home ................................................................................................... Operating the refrigeration appliance.......................................................
Contents Storing food in the MasterFresh zone ............................................................. MastertFresh zone............................................................................................... Humidity-controlled compartment with moisture adjustment........................ Dry compartment with adjustable temperature.............................................. 77 77 77 79 Automatic defrosting .....................................................................................
IMPORTANT SAFETY INSTRUCTIONS This refrigeration appliance complies with current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Please read the operating and installation instructions carefully before using the refrigeration appliance for the first time. They contain important information on safety, installation, use, and maintenance. This is to protect yourself from injury, and from damaging your refrigeration appliance.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This appliance is intended for use in domestic households and similar residential environments such as – staff kitchen areas in shops, offices and other working environments – farm houses and by clients in hotels, motels and other residential type environments – bed and breakfast type environments – catering and similar non-retail applications. This appliance is not intended for use outdoors, in damp environments or in places exposed to rain.
IMPORTANT SAFETY INSTRUCTIONS Safety with children To reduce the risk of injury, do not allow children to play in, on or near the appliance. The door hinges can cause injury. Keep children well away at all times. Ensure that any packing material is disposed of safely and kept out of the reach of children. DANGER of suffocation! Technical safety The coolant circuit has been checked for leaks. The refrigeration appliance complies with statutory and regulatory requirements.
IMPORTANT SAFETY INSTRUCTIONS - Contact Miele Customer Service. The more coolant there is in a refrigeration appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of a combustible gas/ air mixture building up. For every 11 g of coolant, at least 1 m3 of room space is required. The amount of coolant in the refrigeration appliance is stated on the data plate inside the appliance.
IMPORTANT SAFETY INSTRUCTIONS If moisture gets into electrical components or into the power cord, it could cause a short circuit. Therefore, do not operate the machine in areas where there may be moisture or splashing water (e.g., garages, laundry rooms). This appliance must not be installed and operated in mobile installations (e.g. on a ship). Do not use a damaged appliance. It could be dangerous. Check the appliance for visible signs of damage.
IMPORTANT SAFETY INSTRUCTIONS Correct use The refrigeration appliance is designed for use within a specific climate class (room temperature range). Do not use in a climate class for which it is not designed. A lower room temperature will cause the compressor to switch off for longer periods, meaning that the refrigeration appliance is unable to maintain the required temperature. WARNING! DANGER of overheating! Do not cover or block the air vents.
IMPORTANT SAFETY INSTRUCTIONS Stainless steel machines: Adhesives will damage the coated stainless steel surface and cause it to lose its dirt-repellent protective coating. Do not use sticky notes, transparent adhesive tape, masking tape, or other types of adhesive on the stainless steel surface. The surface is easily scratched. Even magnets can cause scratching.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a short circuit. Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance. Do not use sharp edged or pointed objects to - remove frost or ice, - separate frozen foods or remove ice trays.
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance Children could become trapped in the machine and could suffocate. - Remove the machine doors. - Remove the drawers. - Leave the adjustable shelves in the machine so children cannot climb inside. DANGER of electric shock! - Cut the plug off the power cord. - Cut the power cord off the old appliance. Dispose of them separately from the appliance.
Caring for the environment Disposal of packaging material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Return the packaging to your dealer.
*INSTALLATION* Installation Installation location This appliance should be installed in a dry, well-ventilated room. When deciding where to install your refrigeration appliance, please bear in mind that it will use more energy if installed near to a heater, a range, or another appliance that gives off heat. Direct sunlight should also be avoided. The higher the room temperature, the longer the compressor runs and the higher the energy consumption of the refrigeration appliance.
*INSTALLATION* Installation Risk of damage due to high humidity. In environments with high humidity, condensation can build up on external refrigeration appliance panels, which can cause corrosion. Install the refrigeration appliance in a dry and/or air-conditioned room with sufficient ventilation.
*INSTALLATION* Installation Load-bearing capacity of the niche floor To ensure the safe installation of the refrigeration appliance and to guarantee its correct functioning, the floor of the niche where the appliance is to be installed must be smooth and even. It must be made from strong, rigid material. Because the refrigeration appliance is extremely heavy when fully loaded, it is essential that the floor it stands on is able to bear its weight.
*INSTALLATION* Installation Side-by-side This appliance can be installed side-byside with another refrigeration appliance. The following overview will show you which side-by-side options you have with your appliance: A side-by-side merging kit and a top frame (KTF) are required for this. Both are available from your Miele dealer or Miele Service. Instructions for installing appliances side-by-side can be found in the sideby-side merging kit instruction manual. . . .
*INSTALLATION* Installation . . . without partition wall If the appliances are to be installed next to each other without a partition wall between them, they will need to be joined together with the side-by-side installation kit. In addition, you must install the side panel heater to prevent condensation from forming and any resulting damage.
*INSTALLATION* Installation Installation dimensions Position of the electrical connection - The electrical connection must not be positioned higher than 9" (228 mm) above the floor. The electrical socket must not be concealed behind the appliance and must be easily accessible in an emergency.
*INSTALLATION* Installation C D A B A B C D K 2602 SF, K 2612 SF 84"–85 3/16" (2,134–2,164 mm) 24" (610 mm) 24" (610 mm) 3/4" (19 mm) K 2802 SF, K 2812 SF 84"–85 3/16" (2,134–2,164 mm) 30" (762 mm) 24" (610 mm) 3/4" (19 mm) K 2902 SF, K 2912 SF 84"–85 3/16" (2,134–2,164 mm) 36" (915 mm) 24" (610 mm) 3/4" (19 mm) 21
*INSTALLATION* Installation 1 3/16" (30 mm) 10 5/16" (262 mm) 3 3/8" (85 mm) Side view 22 7/8" (22 mm) 4" (102 mm) 4" (102 mm)
*INSTALLATION* Installation Dimensions when the appliance door is open (opening angle 90°/115°) 3/8" (10 mm) D A B C A B C D K 26x2 SF 26 5/8" (677 mm) Cabinet front Door handle 11 5/8" (296 mm) K 28x2 SF 32 5/8" (829 mm) Cabinet front Door handle 14 5/16" (363 mm) K 29x2 SF 38 11/16" (982 mm) Cabinet front Door handle 16 7/8" (428 mm) 23
*INSTALLATION* Installation Building in the appliance Before starting... It is essential to read these installation instructions carefully before starting to install the appliance. The appliance should be installed by a suitably qualified tradesman in accordance with these installation instructions. Safe operation of the appliance is only assured if it has been installed and connected in accordance with the installation instructions.
*INSTALLATION* Installation Aligning the installation niche Checking the installation niche Check the installation dimensions (see “Installation – Installation dimensions”). Check the position of the electrical connection. The length of the power cord is 9' 10" (3 m). The electrical socket must not be concealed behind the appliance and must be easily accessible in an emergency. Check the surroundings for possible collisions (see “Installation – Dimensions with appliance door open”).
*INSTALLATION* Installation Before installation Before installation, remove any accessories from the back of the appliance. Check the refrigeration appliance for damage during transportation. Do not install a damaged appliance. Check that all parts at the back of the appliance are unhindered. To protect the floor during installation, secure an off-cut of flooring or similar material to the floor in front of the installation area.
*INSTALLATION* Installation Preparing the installation niche Risk of damage and injury due to the refrigeration appliance tipping over. This refrigeration appliance is very heavy and can tip forwards when the doors are open. The installation niche must be secured to the wall behind it and/or above it with several screws. Only this will prevent the refrigeration appliance from tipping over after being installed. In addition, use the provided anti-tip brackets to secure the installation niche.
*INSTALLATION* Installation Risk of damage and injury due to the refrigeration appliance tipping over. If the anti-tip brackets are fixed too high up, they cannot be used to secure the refrigeration appliance. The distance between the anti-tip brackets and the refrigeration appliance must not exceed 5/16" (8 mm). Retaining screws for different uses and types of material are supplied in the accompanying pack.
*INSTALLATION* Installation Pushing the appliance into the niche 2 Then push the appliance into the niche, taking care not to damage the electrical connection! If you are installing several refrigeration appliances side by side, now secure the appliances to one another (see the installation instructions for the side-by-side installation kit). Securing with a wooden wedge Secure the installation niche to the wall behind it and/or above it as required using the anti-tip brackets .
*INSTALLATION* Installation 5 Affix edge protection to the adjacent cabinet fronts. Insert the plug connector at the back of the refrigeration appliance (see “Installation – Electrical connection”). Insert the plug into the electrical socket. The electrical socket must be close to the refrigeration appliance and easily accessible. Risk of damage due to electrical overload.
*INSTALLATION* Installation Aligning the refrigeration appliance Align the appliance with neighboring cabinet fronts as described below. The adjustable feet at the front and back of the appliance can all be adjusted from the front of the appliance. Risk of damage due to incorrect feet adjustment. You may damage the adjustable feet if you use a cordless screwdriver. Always adjust the front and rear feet by hand.
*INSTALLATION* Installation Adjust the rear feet with a ratchet (attachment: socket, 8 mm) or a TX 20 screwdriver . Adjust the front feet with a ratchet (attachment: socket, 8 mm) or a TX 20 screwdriver . Tip: Proceed carefully when adjusting the feet, alternating between the left and right feet. Unscrew the adjustable feet and on both sides at least until the marking on the toe-kick is aligned with the required 1 1/4" (32 mm) on the spacer .
*INSTALLATION* Installation Risk of damage if the feet are Securing the appliance in the niche adjusted too much. The rear adjustable feet can be damaged. Unscrew the feet only until the marking on the toe-kick is aligned to a maximum of 2 7/16" (62 mm) (max. niche height of 85 3/16" (2,164 mm)). Use the screws supplied to secure the refrigeration appliance on both sides. Use a level to check the alignment of the appliance.
*INSTALLATION* Installation Securing the toe-kick board and cover Aligning the appliance door Following installation, align the appliance door with adjacent cabinet fronts. To do this, check the gaps to the adjacent cabinet fronts. Remove the film from the adhesive strips on the toe-kick cover provided . If necessary, use the spacers provided and place them on both sides of the appliance door at the top. Secure the toe-kick cover to the toe-kick board .
*INSTALLATION* Installation Remove the covers from both sides of the appliance door. Remove the cover from the light contact switch. Remove the nuts and washers from the threaded bolts . Slightly loosen the screws in the angle trims on both sides.
*INSTALLATION* Installation Close the appliance door and check the distance between the door and adjacent cabinet fronts again. Then re-tighten all screws and . Align the height and sides of the appliance door using the threaded bolts . If necessary, also align the depth of the appliance door via the gaps in the angle trims. 36 Place the washers and nuts back on the threaded bolts and tighten the nuts. The appliance door is now secured. Reattach covers and .
*INSTALLATION* Installation Limiting the opening angle of the appliance door The door hinges are set ex works to enable the appliance door to be opened wide. If, for example, the appliance door hits an adjacent wall when it is opened, you should limit the opening angle of the appliance door to 90°: Place the covers provided on the fixing brackets. Remove the spacers from the appliance door. Open the appliance door. Insert the pin into the lower hinge from above.
*INSTALLATION* Installation Electrical connection Risk of electric shock! The appliance must only be switched on when it has been installed in accordance with the installation instructions. Ground the appliance. The appliance must not be grounded via a gas pipe. If in doubt, have a suitably qualified and experienced electrician check that the installation complies with relevant regulations. Do not install a fuse into neutral current or grounding electrical circuit.
*INSTALLATION* Installation If the outlet is no longer accessible after installation, an additional means of disconnection must be provided for all poles. Suitable means of disconnection include switches with an all-pole disconnect device with a contact opening of at least 1/8" (3 mm). These can be circuit breakers, fuses, and relays. Connecting the appliance The plug and power cord must not come into contact with the back of the appliance as vibrations can cause damage to these components.
Saving energy Installation / Maintenance Temperature setting Normal energy consumption Increased energy consumption In a well-ventilated room. In an enclosed, poorly ventilated room. Protected from direct sunlight. In direct sunlight. Away from heat sources (radiator, range/oven). Near a heat source (radiator, oven). Where the ideal room temperature is approx. 68°F (20°C). Where the ambient room temperature is above 77°F (25°C). Air vents uncovered and dusted regularly.
Saving energy Normal energy consumption Use Increased energy consumption The drawers, and shelves are arranged as they were when the appliance was delivered. Only open the door when necessary and for as short a time as possible. Store food in an organized way. Frequent opening of the door for long periods will cause a loss of coldness. The appliance will try to cool down and the compressor will run for longer periods.
Guide to the appliance a Display b On/Off switch c Door shelves in the appliance door d Holder for the Active AirClean filter e Shelves f Hanging drawer for storing small food items g Interior lighting h Fruit and vegetable drawer i Moisture regulator j Humidity-controlled compartment with moisture regulator for fruit and vegetables k Dry compartment with temperature adjustment for meat and fish l Automatic door opening (Push2open/Pull2open) 42
Guide to the appliance The dry compartment in the MasterFresh zone fulfills the requirements of a cold storage compartment according to EN ISO 15502.
Guide to the appliance Main screen 1 2 3 4 5 39°F a Automatic SuperCool display (only visible when the Automatic SuperCool function has been switched on) b Temperature display (target temperature) c Sensor control for setting the temperature d Display for Miele@home connection status (only visible when the Miele@home function has been set up) e Settings mode sensor control for adjusting various settings in Settings mode 44
Guide to the appliance Settings mode In Settings mode, you can select the following appliance functions and alter their settings to some extent: Symbol Function Language Set Display Brightness Adjust (darker to brighter) Color Scheme Set (dark or bright) Buzzer Tones Adjust the volume or switch off the Buzzer Tones completely (e.g.
Guide to the appliance * Demo Mode Switch off * (only visible when Demo Mode, is switched on see “Selecting additional settings”) Factory Default Reset to default settings (see “Selecting additional settings”) Sabbath Mode Switch on or off (see “Selecting additional settings”) Display Active Air- Switch on or off or reset (see “Selecting additional settings”) Clean Filter Symbols in settings mode / Scroll in settings mode or select a setting / Change a setting (e.g.
Accessories Accessories supplied Appliance plug Active AirClean filters The Active AirClean filters neutralize unpleasant odors in the refrigerator section and stop odors from being transferred to the food. Insert the supplied Active AirClean filters as described under “Cleaning and care – Replacing the Active AirClean filters”. We recommend replacing the Active AirClean filters every 6 months.
Before first use Before first use Allow the appliance to stand for approx. 1 hour prior to connecting it to the power supply. This will help prevent any malfunctions. Packaging material Remove all packaging material from the inside of the appliance. Leftover tape residue. Always remove all packaging material, including adhesive tape, before switching on the appliance. Cleaning Please refer to the relevant instructions in “Cleaning and care”. Clean the inside of the appliance and the accessories.
Before first use Inserting the Active AirClean filters Your refrigeration appliance is equipped with 2 Active AirClean filters which neutralize unpleasant odors in the refrigerator section. Insert the Active AirClean filters supplied as described under “Cleaning and care – Replacing the Active AirClean filters”. Miele@home Your refrigeration appliance is equipped with an integrated WiFi module. Networking is deactivated at the factory.
Before first use Operating the refrigeration appliance The touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers. If your fingers are cold, the touch display may not react. 39 Settings mode In Settings mode , you can select different refrigeration appliance functions and alter their settings to some extent (see “Selecting additional settings”). Touch the sensor control to open Settings mode.
Before first use As soon as your refrigeration appliance has been integrated into your WiFi network, the message Connection successful will appear on your refrigeration appliance‘s display. Confirm the process with OK again. If the WiFi connection is active, will appear in the display. Turn the refrigeration appliance on by pressing the On/Off switch. The On/Off switch is located below the display.
Switching on and off Switching on the appliance Risk of damage due to high hu- Open the appliance door. midity. In environments with high humidity, condensation can build up on external refrigeration appliance panels. This condensation can cause corrosion and lead to damage on external appliance panels. Install the refrigeration appliance in a dry and/or air-conditioned room with sufficient ventilation.
Switching on and off Switching off for longer periods of time If the appliance is not going to be used for a longer period of time: Turn the appliance off. Unplug the appliance or trip the circuit breaker. Clean the refrigeration appliance. Leave the door ajar to air the refrigeration appliance and avoid odors building up inside the appliance.
Selecting additional settings In settings mode , certain settings can be adjusted and functions selected, allowing you to adjust the machine to suit your requirements. The following section only describe the functions in settings mode that require further explanation. The door alarm and other warnings are automatically disabled when the appliance is in settings mode .
Selecting additional settings Adjusting the temperature in the MasterFresh zone (dry compartment) In Settings mode , use the and sensor controls to select MasterFresh and select OK to confirm your selection. Use the and sensor controls to select the desired temperature and touch OK to confirm your selection. Touch the sensor control if you wish to terminate the process. The segment bar displays 5 segments; the temperature is adjusted in increments of approx. 34°F (1°C).
Selecting additional settings Performing a Self Test Perform a Self Test if you are concerned that your refrigeration appliance is not working properly and want to check if it is suffering from any problems. In Settings mode , use the and sensor controls to select Self Test and select OK to confirm your selection. Touch the sensor control if you wish to terminate the process. The Self Test starts and the appliance is checked for any faults or malfunctions.
Selecting additional settings Switching on the Door Assistant Touch the sensor control to return to the previous menu level. You can choose between the two Door Assistants Push2Open and Pull2Open. The default Door Assistant is Push2Open. – Adjusting the intensity The Push2Open Door Assistant is suitable for cabinet fronts without handles. The door will then open automatically when you gently press against it. The Pull2Open Door Assistant is suitable for cabinet fronts with handles.
Selecting additional settings – Adjusting the duration of the AutoClose function – Adjusting the intensity You can also adjust the duration for how long the appliance door will remain open until it closes automatically. You can also adjust the intensity of the Pull2Open function. The lower the set intensity, the less force required when you pull the appliance door. In Settings mode , use the and sensor controls to select Door Assistant and select OK to confirm your selection.
Selecting additional settings Switching off the Door Assistant In Settings mode , use the and sensor controls to select Door Assistant and select OK to confirm your selection. Use the and sensor controls to select Mode and select OK to confirm your selection. Use the and sensor controls to select Off and select OK to confirm your selection. Touch the sensor control to return to the previous menu level.
Selecting additional settings Activating Miele@home If you have already activated Miele@home and then disconnected the connection, you will need to reactivate the connection. In Settings mode , use the and sensor controls to select Miele@home and select OK to confirm your selection. Use the and sensor controls to select Activate and select OK to confirm your selection. Activation successful will appear on the display.
Selecting additional settings Switching off Demo Mode Demo mode allows the appliance to be presented in the showroom without the cooling system being switched on. Do not activate this setting for domestic use. If Demo mode has been switched on as a default setting, will show on the display. In Settings mode , use the and sensor controls to select Demo Mode and select OK to confirm your selection. Press OK for 4 seconds to deactivate will appear on the display.
Selecting additional settings Resetting the settings to their default settings You can reset the refrigeration appliance‘s settings to their default settings. Reset the refrigeration appliance’s settings to the default settings when disposing of your refrigeration appliance, selling it, or putting a used refrigeration appliance into operation. This will reset the network configuration so that all personal data is deleted from the refrigeration appliance.
Selecting additional settings The refrigeration appliance‘s settings will be reset to the following values: Function Default settings Language English Display Brightness Average value (4 of 7 segments) Color Scheme Dark / Buzzer Tones Average value (4 of 7 segments) / Keypad Tone Average value (4 of 7 segments) Temperature Unit °Fahrenheit / Keypad Lock Switched off MasterFresh 32°F (0°C) (2 of 5 segments) Eco Mode Switched off Door Assistant Push2open Miele@ho
Selecting additional settings Switching Sabbath Mode on or off The refrigeration appliance has a Sabbath Mode to support the observance of religious customs. When Sabbath Mode is switched on, you cannot make any settings on your refrigeration appliance. Ensure that the appliance door is properly closed, as visual and audible alarms are switched off in Sabbath Mode. In Settings mode , use the and sensor controls to select Sabbath Mode and select OK to confirm your selection.
Selecting additional settings Switching on, switching off, or resetting the Display Active AirClean Filter The Display Active AirClean Filter will remind you approx. every 6 months that the Active AirClean filters have to be replaced. Change Active AirClean Filter will appear on the display. See “Cleaning and care – Replacing the Active AirClean filters” for instructions on how to replace the Active AirClean filters.
Selecting additional settings Resetting the Display Active AirClean Filter After you have replaced the Active AirClean filters, you must reset the Display Active AirClean Filter so that it can be displayed again after 6 months. If you do not reset the display, it appears again and again. In Settings mode , use the and sensor controls to select the Display Active AirClean Filter and select OK to confirm your selection.
The correct temperature It is very important to set the correct temperature for storing food in the appliance. Bacteria will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these bacteria. Reducing the temperature reduces their growth rate.
The correct temperature Setting the temperature Touch the sensor control to set the temperature. The previously set temperature will appear. Use the and sensor controls to set the temperature. Keeping your finger on the sensor control changes the temperature continuously. Confirm the temperature setting with OK or wait approx. 8 seconds after the last touch of the sensor. This temperature will be automatically adopted.
Using Automatic SuperCool Automatic SuperCool function The Automatic SuperCool function can be used to rapidly reduce the temperature in the refrigerator section to its lowest setting (depending on the room temperature). Automatic SuperCool is particularly recommended for the rapid chilling of large amounts of fresh food or drink. Switching on Automatic SuperCool Touch the sensor control to set the temperature. Touch the sensor control to switch the Automatic SuperCool function on.
Door alarm The appliance is fitted with a warning system to avoid increased energy consumption if the door is left open. Door alarm An alarm will sound if the appliance door has been left open for longer than approx. 2 minutes. The Close the door message also appears on the display. As soon as the door is closed, the alarm will stop and the message on the display will disappear. Turning the door alarm off early If the alarm disturbs you, it can be turned off early.
Adjusting the interior fittings Removing or moving the door shelves Removing or moving the shelves Only move or remove the door shelves when they are empty. Hold the shelf on both sides and raise it slightly so that it can be lifted with the catches over the guide at the back. Pull the shelf forward. Hold the shelf on the frame with both hands and lift it slightly so that it can be lifted with the catches on both sides over the guide.
Adjusting the interior fittings Removing the hanging drawer Moving the hanging drawer The hanging drawer can be fixed under any shelf in the refrigerator section. Pull the hanging drawer out. To remove the holder for the hanging drawer, press against the retainers on both sides of the holder from the rear and pull the holder downwards diagonally from the frame. Pull the hanging drawer straight out to lift it over the pull-out stops on both sides.
Adjusting the interior fittings Removing compartments from the Fridge Zone Pull the compartment out a little bit. Using both hands, grasp the compartment frame from below and push the compartment downwards so that the rear end disengages and lifts upwards. Pull the compartment forwards to remove it. Push the runners back in again to avoid damaging them! Be careful not to wash away the special lubricant in the telescopic runners during cleaning.
Storing food in the refrigerator section Always observe USDA food safety guidelines. Risk of fire from electrical appliances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance. Risk of explosion due to flammable mixes of gases. Electrical components can cause flammable mixes of gases to ignite. Do not store any explosive materials or products containing flammable propellants (e.g., spray cans) in the appliance.
Storing food in the refrigerator section Warmest area The warmest area in the refrigerator section is in the top section of the door. Use this for storing butter so that it remains spreadable and cheese so that it retains its flavor. Food which is not suitable for storage in the fridge zone Not all food is suitable for refrigeration at temperatures below 40°F (5°C) because it is sensitive to cold.
Storing food in the refrigerator section Notes on buying food The freshness of the food when it is first placed in the appliance is the most important factor for how long it stays fresh. Take into account the use-by date and the correct storage temperature. Time out of the fridge, e.g., transporting food in a warm car, should be kept to a minimum. Storing food correctly Ensure that food stored in the fridge zone is in packaging or covered properly (some exceptions apply in the MasterFresh zone).
Storing food in the MasterFresh zone MastertFresh zone The MastertFresh zone provides ideal storage conditions for fruit, vegetables, fish, meat, and dairy products. Food stays fresh considerably longer while retaining both flavor and vitamins. The MasterFresh zone comprises a humidity-controlled and a dry compartment. - Depending on the moisture-regulator setting, the humidity-controlled compartment is particularly suitable for storing fruit and vegetables.
Storing food in the MasterFresh zone The moisture regulator is used to regulate the amount of moisture in the humidity-controlled compartment with settings to . Position of the moisture regulator = slightly increased humidity Select this setting if you store very large quantities of fruits and vegetables in the humidity-controlled compartment. The moisture regulator partially closes the vents in the compartment so that some of the moisture present is retained.
Storing food in the MasterFresh zone Dry compartment with adjustable temperature Tip: This compartment is ideal for all home-cooked meals as any microorganisms that may still be present cannot multiply. The dry compartment is ideal for storing perishable foods such as: The temperature in the dry compartment is maintained at 30 to 37°F (-1 to 3°C).
Storing food in the MasterFresh zone The following tips may help if you find that food you have stored does not keep well (for example, the food wilts or becomes withered after only a short storage time): Only place fresh food in the appliance as the initial condition of the food is crucial to maintaining freshness. Clean the MasterFresh zone before storing food in it. Very wet food should be dried off before storing it in the humidity-controlled compartment.
Automatic defrosting WARNING! DANGER of injury and damage! Do not use any mechanical or other types of aids which are not recommended by the manufacturer to accelerate the defrosting process. Refrigerator section and MasterFresh drawer The refrigerator section and the MasterFresh drawer defrost automatically. Condensate and frost can build up on the back wall of the refrigerator section and the MasterFresh drawer while in use.
Cleaning and care WARNING! DANGER of electric Cleaning agents shock! Unplug the appliance or trip the circuit breaker. To avoid damaging the surfaces of your appliance, do not use: WARNING! Fire hazard! - cleaning agents containing soda, ammonia, acids, or chloride Do not damage the coolant pipework. - cleaning agents containing lime scale remover Do not let water get into the electronic or the lighting.
Cleaning and care Before cleaning the appliance Turn the appliance off completely by pressing the On/Off switch. Take any food out of the appliance and store it in a cool place. Take out all other removable parts for cleaning (see “Adjusting the interior fittings”). Interior and accessories Clean the appliance regularly, or at least once a month. Clean up any spills, stains, or food immediately. Do not allow them to dry and stick to the appliance.
Cleaning and care Appliance front The appliance front has a special highquality finish (Clean Touch Steel). This is resistant to soiling and is very easy to clean. Do not use stainless steel cleaning agent on these surfaces, as it will damage the finish. Do not use Miele stainless steel conditioning agent on these surfaces, as it will cause noticeable smearing. If soiling is allowed to sit for any length of time, it may become impossible to remove. Surfaces may become discolored or damaged.
Cleaning and care Replacing the Active AirClean filters The Active AirClean filters in the refrigerator section need to be replaced approx. every 6 months. Change Active AirClean Filter will appear on the display. The holder can be fixed under any shelf in the refrigerator section.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. To prevent cold from escaping, open the appliance doors as little as possible until the fault has been corrected.
Frequently Asked Questions Problem Possible cause and solution The compressor is turning on more frequently and for longer periods of time; the temperature in the refrigeration appliance is too low. The ventilation gaps in the cabinetry have been covered or become too dusty. Do not block the ventilation gaps. Clean the ventilation gaps on a regular basis to remove any dust. The appliance door has been opened too frequently, or a large number of bottles have been put inside the unit all at once.
Frequently Asked Questions Problem Possible cause and solution The compressor runs continuously. Not a fault. To save energy, the compressor runs at a lower speed when less cooling is required. This increases the compressor run time. An alarm sounds. The appliance door has been open for longer than 3 minutes. Close the appliance door. No alarm sounds deYou have switched off the audible signal. spite the appliance door Switch the audible signal back on using Settings being open. mode .
Frequently Asked Questions Messages in the display Message Possible cause and solution The warning sounds and the message Close the door appears on the display. The appliance door is open. Close the appliance door. If you wish to turn the alarm off early, touch the sensor control OK on the display. The alarm will stop. The temperature display is dark and the symbol is shown on the display. The Sabbath Mode function is switched on.
Frequently Asked Questions The interior lighting is not working. Problem Possible cause and solution The interior lighting is not working. The refrigeration appliance has not been turned on. Turn the refrigeration appliance on. The Sabbath Mode function is switched on: the temperature display is dark and the symbol is shown on the display. You can switch off Sabbath Mode at any time via the Settings mode . There is a fault. Risk of electric shock due to exposed, live electrical components.
Causes of noises Normal noises Cause Brrrrr... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulates through the pipes. Click... Clicking sounds occur whenever the thermostat switches the motor on or off. Crack... A cracking sound can be heard when materials expand inside the appliance.
Customer Service Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
Declaration of conformity Frequency range 2.412 GHz – 2.
Copyrights and licenses Miele uses their own and third party software which is not subject to any so-called open source license for the operation and control of the device/appliance. This software/these software components are protected by copyright. The copyright powers of Miele and third parties have to be respected. Furthermore, this device/appliance contains software components which are distributed under open source license conditions.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Customer Service & Support Phone: 888-99-MIELE(64353) info@mieleusa.com www.mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
K 2602 SF, K 2802 SF, K 2812 SF, K 2902 SF, K 2912 SF en-US, CA M.-Nr.
