Operating and Installation Guide

Installation
*INSTALLATION*
30
5
 Affix edge protection to the adja-
cent cabinet fronts.
 Insert the plug connector at the back
of the refrigeration appliance (see “In-
stallation – Electrical connection”).
 Insert the plug into the electrical
socket.
The electrical socket must be close
to the refrigeration appliance and
easily accessible.
 Risk of damage due to electrical
overload.
If the refrigeration appliance is elec-
trically overloaded, this can cause a
short circuit and thus damage your
refrigeration appliance.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.
Tip: Secure the power cord to prevent it
becoming caught: tie a piece of string
to the middle of the power cord and as
the refrigeration appliance is being
pushed into the niche, pull the cord for-
ward underneath the appliance.
 Carefully push the refrigeration appli-
ance into the niche.
 If the refrigeration appliance cannot
be pushed into the niche (because
the floor is uneven, for example), un-
screw the rear feet slightly (see “In-
stallation – Aligning the refrigeration
appliance”) and slide the refrigeration
appliance into the installation niche.
 Remove the edge protection from
the adjacent cabinet fronts.