Operating and Installation Guide

Installation
*INSTALLATION*
39
If the outlet is no longer accessible after
installation, an additional means of dis-
connection must be provided for all
poles. Suitable means of disconnection
include switches with an all-pole dis-
connect device with a contact opening
of at least 1/8" (3mm). These can be
circuit breakers, fuses, and relays.
The plug and power cord must not
come into contact with the back of the
appliance as vibrations can cause dam-
age to these components. This could
result in a short circuit.
Do not plug other appliances into elec-
trical outlet behind this appliance.
Do not connect the appliance to a
stand-alone inverter such as those used
with an autonomous energy source e.g.,
solar power.
When the appliance is turned on, power
surges could result in a safety switch-
off. This can damage the electronics.
The appliance must not be used with
so-called energy saving devices ei-
ther. These reduce the amount of en-
ergy supplied to the appliance, causing
it to overheat.
If the power cord needs to be replaced,
this must be performed by a qualified
technician.
Connecting the appliance
 Insert the plug into the back of the
appliance.
Make sure that the plug has clicked into
position correctly.
 Insert the plug into the electrical out-
let and switch on.
The appliance is now connected to the
electricity supply.