Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Securing the toe-kick board and cover
- Aligning the appliance door
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Accessories
47
Accessories supplied
Appliance plug
Active AirClean filters
The Active AirClean filters neutralize un-
pleasant odors in the refrigerator sec-
tion and stop odors from being trans-
ferred to the food.
Insert the supplied Active AirClean fil-
ters as described under “Cleaning and
care – Replacing the Active AirClean
filters”.
We recommend replacing the Active
AirClean filters every 6months.
Toe-kick cover in stainless steel look
The toe-kick cover in stainless steel
look ensures a uniform stainless steel
appearance.
Optional accessories
A range of useful Miele accessories and
care products are available for your ap-
pliance.
Active AirClean filters
See “Accessories supplied” for a de-
scription.
Active AirClean filters with holder
The Active AirClean filters neutralize un-
pleasant odors in the fridge zone and
stop odors from being transferred to the
food.
The holder for the Active AirClean filters
can be fixed under any shelf in the
fridge zone.
Side-by-side installation kit and Top
Frame
To install two or more refrigeration ap-
pliances next to one another, you will
need the side-by-side installation kit
(see “Installation – Side-by-side”).
You also need a cover (Top Frame KTF)
to connect the appliances and to cover
the gap above the tops of the appli-
ances.
Hinge pocket
If the door hinging needs to be changed
on your refrigeration appliance, the up-
per toe-kick ventilation grille must be
converted. A new hinge pocket is re-
quired in order to do this.
The door hinging must only be replaced
by Miele Technical Service.
Accessories are available to order via
the Miele Webstore, from Miele di-
rectly (see back cover for contact de-
tails) or from your Miele dealer.