Operating and Installation Guide

Selecting additional settings
58
– Adjusting the duration of the Auto-
Close function
You can also adjust the duration for
how long the appliance door will remain
open until it closes automatically.
 In Settings mode, use the and
sensor controls to select Door As-
sistant and select OK to confirm your
selection.
 In Settings mode, use the and
sensor controls to select AutoClose
and select OK to confirm your selec-
tion.
 Use the and sensor controls to
select the duration (5 to 30seconds)
and touch OK to confirm your selec-
tion.
To protect against inadvertent open-
ing: if you do not pull the appliance
door open, it will close again by itself
after a duration defined by you.
Switching on Pull2Open
 In Settings mode, use the and
sensor controls to select Door As-
sistant and select OK to confirm your
selection.
 Use the and sensor controls to
select Mode and select OK to confirm
your selection.
 Use the and sensor controls to
select Pull2Open and select OK to
confirm your selection.
 Touch the sensor control to return
to the previous menu level.
– Adjusting the intensity
You can also adjust the intensity of the
Pull2Open function. The lower the set in-
tensity, the less force required when
you pull the appliance door.
 In Settings mode, use the and
sensor controls to select Door As-
sistant and select OK to confirm your
selection.
 In Settings mode, use the and
sensor controls to select Intensity
and select OK to confirm your selec-
tion.
 Use the and sensor controls to
select the right intensity (Low, Medium,
High) and select OK to confirm your
selection.