Owner's Manual
Installation information
16
Ventilation
WARNING! Risk of fire!
Operation of the appliance is limited.
Keep the required ventilation gaps
free from obstruction.
Noncompliance with the specified di-
mensions for the ventilation grille will
cause the compressor to turn on
more often and run for longer peri-
ods.
This causes increased energy con-
sumption and an increased com-
pressor operating temperature,
which can result in damage to the
compressor.
Do not block the ventilation gaps.
They must also be cleaned on a reg-
ular basis to remove dust.
Side-by-side
This appliance can be installed side-by-
side with another refrigeration appli-
ance. The following overview will show
you which side-by-side options you
have with your appliance:
A side-by-side merging kit and a top
frame (KTF) are required for this. Both
are available from your Miele dealer or
Miele Technical Service.
Instructions for installing appliances
side-by-side can be found in the side-
by-side merging kit instruction man-
ual.
...with partition wall
The wall a between the side-by-side
appliances must be at least
5/8" (16mm) thick.