Operating and Installation Guide
ManualsBrandsMiele ManualsAll Refrigerator- No Freezer24 Inch Panel Ready Smart Refrigerator Column with 13 Cu. Ft. Capacity, WifiConnect, DynaCool, Push2open, IceMaker, MasterFresh, SuperCool, Sabbath Mode, Active AirClean Filter, BrilliantLight, MasterSensor, and Energy Star: Panel Ready, Right Hinge
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation
- Installation location
- Installation notes
- Installation dimensions
- Dimensions of the cabinet front
- Building in the appliance
- Before starting...
- Tools required
- Weight of cabinet front
- Aligning the installation niche
- Checking the installation niche
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the refrigeration appliance
- Securing the appliance in the niche
- Preparing the cabinet fronts
- Securing and aligning the cabinet front
- Mounting the fixing brackets
- Securing the covers
- Mounting the cover in a side-by-side combination
- Securing the toe-kick ventilation grille and toe-kick cover
- Limiting the opening angle of the appliance door
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Declaration of conformity
- Copyrights and licenses
Using Automatic SuperCool
80
AutomaticSuperCool
function
The AutomaticSuperCool function can
be used to rapidly reduce the
temperature in the refrigerator section
to its lowest setting (depending on the
room temperature).
AutomaticSuperCool is particularly
recommended for the rapid chilling of
large amounts of fresh food or drink.
Switching on AutomaticSuperCool
Touch the sensor control to set the
temperature.
Touch the sensor control to switch
the AutomaticSuperCool function on.
The symbol is highlighted in color
and the newly set temperature value of
36°F (2°C) appears on the display.
Confirm the setting with OK or wait
approx. 8seconds after the last press
of the button. The setting will be
automatically adopted.
The symbol is now illuminated on the
display.
The appliance will now run at maximum
power.
Switching off AutomaticSuperCool
Touch the sensor control to set the
temperature.
The symbol is highlighted in color
and the temperature value of 36°F (2°C)
is shown on the display.
Touch the sensor control to switch
the AutomaticSuperCool function off.
The symbol is no longer highlighted
in color and the previous temperature
setting appears again on the display.
Confirm the setting with OK or wait
approx. 8seconds after the last press
of the button. The setting will be
automatically adopted.
The symbol disappears from the
temperature display.
The refrigeration appliance will continue
running at normal power.
If you do not turn off the
AutomaticSuperCool function, it will
turn itself off automatically after approx.
6hours. The appliance will then run at
normal power again.
Tip: To save energy, the
AutomaticSuperCool function can be
turned off once food and drinks are
sufficiently chilled.