Fully Integrated 30” MasterCool II All Refrigerator: K 2801 Vi / K 2811 Vi All Freezer: F 2801 Vi / F 2811 Vi Bottom Mount: KF 2801 Vi / KF 2811 Vi Shown: F 2471 Vi merged with K 2801 Vi Please note: This information is subject to change 8miele.
Fully Integrated 30” MasterCool II SPECIFICATIONS Overall Unit Dimensions 293/4” (756 mm) W x 833/4”- 853/16” (2127 - 2164 mm) H x 24” (610 mm) D [Depth does not include door panel] Niche Minimum Cabinet Niche Opening Interior Volume 30” (762 mm) W* x 84” - 853/16” (2134 - 2164 mm) H x 243/4” (629 mm) D K 28x1 Vi F 28x1 Vi KF 28x1 Vi Refrigeration Volume ** 0 ** Freezer Volume 0 ** * K 28x1 Vi F 28x1 Vi KF 28x1 Vi Electrical Electrical Requirements 110V / 120V, 60Hz, 15 Amps In the case of
Fully Integrated 30” MasterCool II CUTOUT DIMENSIONS • Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness CUTOUT DETAILS • The electrical connection must not be positioned higher than 9” (228.6 mm) above the floor. • The 1/4” (6.4 mm) plumbed water connection should not be positioned higher than 2” (50.8 mm) above the floor. Notes: In case of an emergency the electrical outlet must be easily accessible and must not be concealed behind the appliance.
Fully Integrated 30” MasterCool II POWER SUPPLY AND WATER CONNECTION (Water Connection For F 28x1 Vi & KF 28x1 Vi Only) Rear View Front View Water connection is located in front of unit. 1/4” compression fitting is needed. Electrical - 5 foot (1.
Fully Integrated 30” MasterCool II | K 28x1 Vi & F 28x1 Vi CUSTOM PANEL INSTALLATIONS Minimum 29 3/4” (756 mm) Minimum 3/4” (19 mm) outside frame 106 Pounds Page 5 of 10
Fully Integrated 30” MasterCool II | K 28x1 Vi & F 28x1 Vi DOOR PANEL DIMENSIONS KFP 3004 - Door Panel Available as an accessory for the following models: • K 28x1 Vi • F 28x1 Vi Page 6 of 10
Fully Integrated 30” MasterCool II | KF 28x1 Vi CUSTOM PANEL INSTALLATIONS Minimum 29 3/4” (756 mm) Minimum 3/4” (19 mm) outside frame 51 3/8” (1304 mm) 104 lbs HOM - 51 1/2” (1307 mm) - TKH Total height of machine. Can be adjusted to match adjoining cabinets - typically 84” (2133 mm).
Fully Integrated 30” MasterCool II | KF 28x1 Vi DOOR PANEL DIMENSIONS KFP 3014 - Top Panel KFP 3024 - Bottom Panel Available as an accessory for the following model: • KF 28x1 Vi Page 8 of 10
Fully Integrated 30” MasterCool II HINGING DETAILS 115° OPENING Available for the following models: • K 28x1 Vi • F 28x1 Vi • KF 28x1 Vi 0-1/8” (3 mm) 1-3/8”(35mm) 1-1/6” (29.6mm) 17/24” (18mm) 1/4”(6.4mm) 0-3/4” (19 mm) 1” (25 mm) 1-1/4” (32 mm) 1-1/2” (38 mm) 1-3/4” (44 mm) 2-5/8” (67mm) 2-1/3” (59mm) 2-1/24”(52mm) 0-3 /4” 1-1 1-1 /2” DOOR SWING AT 115° OPENING /4” (38 1” ( (32 mm 25 mm ) (19 mm 3”(76.2mm) 1-3/4”(44.
Fully Integrated 30” MasterCool II HINGING DETAILS 90° OPENING Available for the following models: • K 28x1 Vi • KF 28x1 Vi 0-3/4” (19 mm) 1” (25 mm) 1-1/4” (32 mm) 1-1/2” (38 mm) 1-3/4” (44 mm) 2” (51 mm) Handle or object that is NOT flush with Cabinet Front. 1-3/16” (30mm) 7/16” (11 mm) 0-1/8” (3 mm) 1-7/16” (36.5mm) 1-11/16” (43mm) 1-15/16” (49.
