Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Electrical connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the SmartFresh zone
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Declaration of conformity
- Copyright and licenses
Selecting additional settings
57
To protect against inadvertent open-
ing: if you do not pull the appliance
open, it will close again by itself after a
duration defined by you (see “Set Au-
toClose duration”).
Pull2Open
In settings mode, use the and
arrow buttons to selectDoor Assistant
and selectOK to confirm your selec-
tion.
Use the and arrow buttons to
selectMode and touchOK to confirm
your selection.
Use the and arrow buttons to
selectPull2Open and touchOK to
confirm your selection.
Touch the sensor control to return
to the previous menu level.
– Adjusting the intensity
You can also adjust the intensity of the
Pull2Openfunction. The lower the inten-
sity, the less force is required when
pulling the door.
In settings mode, use the and
arrow buttons to selectDoor Assistant
and selectOK to confirm your selec-
tion.
In settings mode, use the and
arrow buttons to selectIntensity and
selectOK to confirm your selection.
Use the and arrow buttons to
select the desired intensity (Low,
Medium, High) and touchOK to con-
firm your selection.
Switching off Door Assistant
In settings mode , use the and
arrow buttons to select Door Assistant
and select OK to confirm your selec-
tion.
Use the and arrow buttons to
select Mode and touch OK to confirm
your selection.
Use the and arrow buttons to
select Off and touch OK to confirm
your selection.
Touch the sensor control to return
to the previous menu level.