installation instructions
Building in the appliance
62
Attach the fixing bracket securely us-
ing at least 6 short chipboard
screws3/16" x 9/16" (4x14mm).
(On raised paneled doors only use
4screws on the edges).
Pull the fitting aids upwards to re-
move them.
Turn them around and fit them into
the middle slots on fixing bracket
for safe keeping.
Hang the cabinet door on adjusting
bolts.
Screw nuts loosely onto the ad-
justing bolts.
Close the door and check the dis-
tance between the door and adjacent
cabinet doors.
Align to match adjacent doors if nec-
essary:
Side adjustments X are made by slid-
ing the cabinet door, and height ad-
justments Y by turning adjusting bolts
with a screwdriver.
Whilst counterholding adjusting
bolts with a screwdriver, tighten
nuts on the appliance door at the
top with a screwdriver.