Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Installation
Installation
*INSTALLATION*
60
Securing the appliance in the niche
1.Secured at the top
2.Secured at the side
Screw the appliance into position on
the right and the left.
Installing the door panel
Ensure that the toe-kick facing is re-
installed correctly.
The distance between the appliance
door and the mounting frame is set to
5/16" (8mm) at the factory. Check
this distance and adjust it if neces-
sary.
Push the installation aids to the
height of the door panel. The lower
contact edge X of the installation aids
must be at the same height as the
upper edge of the door panel to be
installed (symbol).