Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Saving energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Customer Service
- Installation
Installation
*INSTALLATION*
61
Tip: Push up the installation aids to-
gether with the cabinet front until they
are at the same height as the neighbor-
ing unit doors.
Unscrew the nuts and remove the
mounting frame together with the
installation aids .
Draw a faint central line with a pencil
on the inside of the door panel.
Hang the mounting frame with the
installation aids on the inside of the
door panel. Align the mounting frame
centrally.
Attach the mounting frame securely
using at least 6 short particle board
screws. (On raised paneled doors,
only use 4 screws on the edges.) Pre-
drill holes into the door panel if nec-
essary.
Pull the installation aids upward to re-
move them .
Turn them around and push them all
the way into the middle slots on the
mounting frame for safekeeping.