Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Electrical connection
- Installation
- Changing the door hinges
- Adjusting the door hinge
- Building in the appliance
Changing the door hinges
53
Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left-hand hinging
is required, the hinges must be
changed.
To change the door hinging, you will
need the following tools:
Appliance door
Open the appliance door.
Remove covers , , and with a
slotted screwdriver.
Loosen fixing screws slightly.
Push the appliance dooroutwards,
take it off its hinges and place it to
one side.
Completely remove the fixing
screws and loosely screw them in
the opposite side at the top and
the bottom.
Use a power screwdriver to secure
the hinges. The screws are self-tap-
ping.
If you have inserted pins into the hinges
to limit the door's opening angle: