Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Electrical connection
- Installation
- Changing the door hinges
- Adjusting the door hinge
- Building in the appliance
![](/manual/miele/k31222ui/operating-installation-instructions-english/images/img-60.png)
Building in the appliance
60
The foam ensures the airflow
is separated to prevent malfunction-
ing of the appliance.
Insert the piece of foam supplied.
Reinstall the toe-kick facing, but
do not secure it in position yet.
Without a continuous toe-kick facing:
Pull the toe-kick facing and for-
ward until the ventilation slats are in
alignment with the adjacent cabinet
toe-kick facings.
Hold the toe-kick facing securely and
screw it into place on the right and
left using the bolts supplied.
With a continuous toe-kick facing:
Push the toe-kick facing right up
against the appliance and screw it
into place on the right and left using
the bolts.
Installing a continuous toe-
kick facing
The appliance is ventilated through a
ventilation grille in its toe-kick.
The ventilation grille must never be
obstructed.
If a continuous toe-kick facing is to be
installed, a suitable ventilation gap will
need to be cut into it for the appli-
ance's ventilation grille.
Trim the toe-kick facing (U) to the cor-
rect height.
Adjust the height (V) along the niche
width (W) underneath the appliance
toe-kick facing.