Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Electrical connection
- Installation
- Changing the door hinges
- Adjusting the door hinge
- Building in the appliance
Building in the appliance
62
Draw a faint central line with a pencil
on the inside of the cabinet door.
Hang mounting frame with the instal-
lation aids on the inside of the
cabinet door.
Align the fixing bracket centrally.
Attach the fixing bracket securely us-
ing at least 6 short chipboard
screws (4x14mm). (On raised
paneled doors only use 4 screws on
the edges).
Pull the fitting aids upwards to re-
move them.
Turn them around and fit them into
the middle slots on fixing bracket
for safe keeping.
Hang the cabinet door on adjusting
bolts.
Screw nuts loosely onto the ad-
justing bolts.
Close the door and check the dis-
tance between the door and adjacent
cabinet doors.
Align to match adjacent doors if nec-
essary:
Side adjustments X are made by slid-
ing the cabinet door, and height ad-
justments Y by turning adjusting bolts
with a screwdriver.