Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- How to save energy
- Guide to the appliance
- Switching on and off
- The correct temperature
- Using Automatic SuperCool
- Door alarm
- Selecting additional settings
- Storing food in the refrigerator section
- Adjusting the interior fittings
- Defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Technical Service
- Electrical connection
- Installation
- Changing the door hinges
- Adjusting the door hinge
- Building in the appliance
Building in the appliance
63
Whilst counterholding adjusting
bolts with a screwdriver, tighten
nuts on the appliance door at the
top with a screwdriver.
Attach the appliance door and the
cabinet door using screws through
fixing brackets:
– Drill holes in the cabinet door (mark
the position of the holes first).
– Screw in the short chipboard
screws (4x14mm).
Align the cabinet door along the
depth plane Z: loosen the screws in
the long slots at the top of the appli-
ance door as well as under the ap-
pliance door. By moving the cabi-
net door, create a gap of
1/16" (2mm) between the cabinet
door and the front edge of the niche.
Align according to the adjacent cabi-
net doors.
Close the door, check it is fastened
correctly, and align it with adjacent
cabinet doors.
Tighten all the screws again.