Installation instructions

Before installing the appliance
^
Take the accessory pack which
includes installation parts and other
accessories out of the appliance and
remove the packaging strap holding
the door in place.
^
Do not remove the following from the
back of the appliance:
– The spacers (depending on model).
These ensure the gap required
between the back of the appliance
and the wall is maintained.
– Depending on model, the pouches
located in the metal grille (heat
exchanger).
They are required for the correct
functioning of the appliance. The
contents are not poisonous or
dangerous.
^
Remove any cable clips from the
back of the appliance.
^
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Open the appliance door, and
remove the red safety catch a
(depending on model).
Installation
50