Installation instructions

^ Push the loose bracket up against
the furniture wall.
^ Attach fixing bracket j to the
housing unit side wall with screw s.
Drill holes in the housing unit side
walls if necessary.
^
Secure fixing bracket g to the
housing unit side wall with screws t.
Drill holes in the housing unit side
walls if necessary.
Important Push the protruding
bracket using your thumb towards
the housing unit wall whilst tightening
the screws. The appliance must not
pull back into the unit.
^
Retighten screws h and k.
^
Snap off any protruding ends from
the fixing bracket. They are no longer
required.
^ Replace covers f and u on the
fixing brackets.
Building in the appliance
63