Specification Sheet

NOTE: Drawing is not to scale.

SPECIFICATION SHEETS 011208

Product and Cut-out Dimensions

KF1811Vi / KF1801Vi

30"

25" min.

29 3/4"

83 1/2" - 85 3/8"

9 1/2"

24"

6 5/8" - 8 1/2"

4 1/8"

84"

1 1/4"

UNIT ACCEPTS

TWO (2) CUSTOM

FRONT PANELS

2" - 8 3/8"

Notes

5 foot - 120 Volt - 15 Amp 3-wire molded plug power

supply connects lower left rear.

Standard NEMA 5-15 Outlet - locate less than 9" above

finished floor

1/4" flexible water line - tape to floor

E -

O -

W -

• All Installations must be done in accordance with local codes

• Sides of adjoining cabinets should be filled (flush to frame) to

insure proper fit and finish

Location Codes

PAGE 1
Product and Cut-out Dimensions KF1811Vi / KF1801Vi 84" 25" m in. 4" 29 3/ 24" EPTS ACC TOM T I N U US (2) C NELS O W T A NT P FRO O 30" 83 1/2" - 85 3/8" W E E - 5 foot - 120 Volt - 15 Amp 3-wire molded plug power supply connects lower left rear.
PAGE 2
Product and Cut-out Dimensions KF1811Vi / KF1801Vi Lower hinge location Hinge Upper Door Hinge 1/2" - 2 3/8" 29 11/16" 29 1/8 - 29 1/2" Lower Drawer NOTE: Drawing is not to scale.
PAGE 3
Front Panel Information Fully Integrated Model Custom Panel Installations These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding cabinets.
PAGE 4
Front Panel Information Hinging Details 90° Door 115° Door Thickness options Thickness options 0-1/8" 0-1/8" 0-3/4" 1" 1-1/4" 1-1/2" 1-3/4" 0-3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" Cabinet Front Cabinet Front 1" Fro nt P ane l 0-3/4" 1-1/2" 1-1/4" 1" 1-1/4" Front Panel 0-3/4" 1-1/2" Door Swing Door Swing 14 3/8" MAX 32 11/16" 7/16" NOTE: Additional space needed depending on thickness of front panels and handle used NOTE: Additional space needed depending on thickness of front panels and han