Operating and Installation Instructions

Using the settings
This appliance is operated with the use
of touch keys activated by a finger.
–
An available button will appear white.
–
A selected button will appear yellow.
^
Touch the access button "p"soit
turns yellow.
On the control panel you will now see
the sensor buttons of the four appliance
zones.
At the right of the control panel there is
a sensor button to turn the ice maker on
and off.
When the ice maker is in operation, the
sensor button appears yellow.
^
To change settings (e.g., to set the
temperature, etc.), touch the sensor
button for the appliance zone you
wish to set.
The selected sensor button appears
yellow and depending on the zone
selected additional sensor buttons may
appear on the control panel.
Depending on the zone selected, you
can now:
–
adjust the temperature,
–
select the SuperCool function, or
–
select settings for the SmartFresh
drawers by food type, or
–
turn on the ice cube maker.
For additional information, see the
corresponding sections in this manual.
^ To de-select a zone touch the sensor
button for that particular zone so that
it turns white, or select another
sensor button.
^
To leave the settings menu, touch the
access button "p" so it turns white.
The last settings entered are stored.
If the access button is not pressed
the display will go out after approx.
30 secs.
The sensor buttons for the four
appliance zones now disappear from
the control panel.
Settings
10