Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the Fridge-Freezer combination 7
- Before use 9
- Settings 10
- Temperature and door alarm 13
- Setting the temperature 14
- SmartFresh drawers 16
- Using the refrigerator efficiently 18
- Using the freezer efficiently 19
- SuperCool 21
- Ice cube maker 22
- Automatic defrost 23
- Adjusting the interior fittings 24
- Cleaning and care 28
- Water filter 33
- Lead free certificate 38
- Frequently asked questions 39
- After sales service 47
- Caring for the environment 50
- Installation 51
- Dimensions 56
- Installing the appliance 59
- Plumbing 77
- Electrical connection 80
- RemoteVision (optional accessory) 81
Humidity filters
The two humidity filters, located above
the SmartFresh drawers, must be
removed for cleaning.
^ Remove the SmartFresh drawer.
^ Unhook the filter cover, 1. in each
side of the drawer and remove them
along with the filter mat downwards
starting from 2.
^
Remove the filter mat.
^
Clean the filters by rinsing them with
lukewarm water.
Do not clean in a dishwasher or
washing machine. This will damage
the filter.
^
Air-dry the filters.
^
Place the filters back in the filter
cover.
^
Put the filter cover back in place,
inserting the rear hooks first.
^
Re-insert the SmartFresh drawer.
Ventilation slits
^ Check the ventilation slits in the base
panel regularly. Remove any dirt/dust
with a vacuum cleaner or brush.
Clean as needed.
Door seals
Do not use oil or grease on the door
seals. This may cause the seals to
deteriorate and become porous over
time.
^
Clean the door seals with warm water
and dry thoroughly.
Cleaning and care
30