Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the Fridge-Freezer combination 7
- Before use 9
- Settings 10
- Temperature and door alarm 13
- Setting the temperature 14
- SmartFresh drawers 16
- Using the refrigerator efficiently 18
- Using the freezer efficiently 19
- SuperCool 21
- Ice cube maker 22
- Automatic defrost 23
- Adjusting the interior fittings 24
- Cleaning and care 28
- Water filter 33
- Lead free certificate 38
- Frequently asked questions 39
- After sales service 47
- Caring for the environment 50
- Installation 51
- Dimensions 56
- Installing the appliance 59
- Plumbing 77
- Electrical connection 80
- RemoteVision (optional accessory) 81
^
After the filter change the filter
indicator in the display still flashes.
The change must be be confirmed in
the electronic.
Confirming the filter change
^ Press and hold the filter change
sensor button.
^ At the same time place a finger on
the access button. Press and hold
both sensor buttons for approx. 5
seconds until a beep is heard.
The water filter change has been
confirmed and the filter change
indicator had been reset.
The filter change indicator goes out.
^
Close the door.
After installing a new water filter
discard the first 24 hours of ice
production.
Using an external water filter
If your household water supply already
has an external water filter installed,
leave the standard water filter (bypass
cartridge) installed in the appliance.
Water filter
35