Operation Manual

Settings mode
You can select further settings in
settings mode and then select certain
appliance functions and adjust their
settings. The settings for the different
functions are described in more detail
in the relevant section of these
instructions.
Overview of functions that can be
selected in settings mode:
Function Symbol
To enter or leave settings
mode
;
To select the
temperature unit
(see "The correct
temperature")
†
No function allocated ;
To switch the sensor tone
on/off (see "Switching on
and off")
=
No function selected ^
Switching the sensor tone on/off
The tone which sounds each time a
sensor is touched can be deactivated.
^
Touch the access sensor to highlight
it in yellow.
^ Touch the sensor for the refrigerator
zone so that it is highlighted in
yellow.
^ Take note of the position of the X
sensor (but do not touch it!).
^ Touch the access sensor until it is
highlighted in white and all of the
other sensors are no longer lit up.
^ Place your finger in the position of the
X sensor, and leave it there.
^
At the same time, briefly touch the
access sensor (without moving your
finger from the X sensor).
Switching on and off
21