Operation Manual

Stainless steel fronts
Stainless steel fronts and stainless steel
look plinth grilles are available from
your dealer or the Miele Spare Parts
Department.
Weight of the door/drawer
fronts
Before fitting the door/drawer fronts,
ensure that the weight of the fronts do
not exceed the maximum permitted:
Appliance Max.
weight
of fridge
door in kg
Max.
weight
of freezer
drawer
front in kg
KF 1801 Vi,
KF 1811 Vi
47 10
KF 1901 Vi,
KF 1911 Vi
38 14
Fitting a door front which is heavier
than the maximum permitted could
damage the hinges.
Building into a peninsular run
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Building-in at the end of a run
of units
If one side of the appliance is visible, a
side panel is required.
The side panel must be fixed to the
wall, the floor and any furniture/units
above before the appliance is placed in
the niche.
The size of the side panel must match
that of the furniture panel opposite.
Installation
77