Operating instructions/Installation instructions

Table Of Contents
Cleaning and care
114
Rinse the filter under running luke-
warm water. Turn the filter over under
the running water to clean it on all
sides.
4.
Reinsert the filter into the back of the
filter cartridge 4.).
5.
Slide the filter cartridge as far as it
will go into the filter opening 5.), mak-
ing sure the cap is vertical.
6.
Turn the cap of the filter cartridge
clockwise until it is in the horizontal
position 6.).
Risk of damage caused by water
rushing out.
If the filter cartridge is not fitted cor-
rectly, there is a risk of water leaking
out of the refrigeration appliance.
When fitting the filter cartridge, be
sure to turn it as far as the marker.
Once the IntensiveClear mesh filter has
been cleaned, the water filter display
must be reset using Settings mode
on the display (see “Resetting the Water
filter display” in “Selecting additional
settings”).