Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Specifications for the mains water connection
- Building-in dimensions
- Dimensions of front panels
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture fronts
- Aligning the building-in niche
- Checking the installation niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the front panels
- Securing and aligning the furniture front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Mains water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Super cool and Super freeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Installation
*INSTALLATION*
27
Weight of the furniture fronts
Before installing the furniture fronts,
make sure that they do not exceed the
maximum permitted weight:
Refrigera-
tion appli-
ance
Max.
weight of
upper fur-
niture front
Max.
weight of
lower fur-
niture front
KF2802Vi,
KF2812Vi
45kg 18kg
KF2902Vi,
KF2912Vi
40kg 10kg
Risk of damage due to excessive
weight of furniture fronts.
Installing furniture fronts which are
heavier than the maximum permitted
weight could damage the hinges.
This damage can affect various
factors, such as operation of the ap-
pliance.
Before installing the furniture fronts,
make sure that they do not exceed
the maximum permitted weight.
Aligning the building-in niche
The building-in niche must be carefully
aligned using a spirit level before the re-
frigeration appliance is installed. The
niche corners must be at 90° angles to
each other, otherwise the furniture front
will not sit straight on all 4corners of
the building-in niche.