Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Specifications for the mains water connection
- Building-in dimensions
- Dimensions of front panels
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture fronts
- Aligning the building-in niche
- Checking the installation niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the front panels
- Securing and aligning the furniture front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Mains water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Super cool and Super freeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Installation
*INSTALLATION*
51
The stainless steel hose must only
be replaced by an original Miele
spare part. The food-grade, stainless
steel hose is available to order from
the Miele webshop, from the Miele
Customer Service Department or
from your local Miele dealer.
A stopcock must be provided between
the stainless steel hose and the mains
water supply to ensure that the water
supply can be cut off if necessary.
Make sure that the stopcock is still
accessible after the refrigeration ap-
pliance has been installed.
The stainless steel hose is 2m long and
is already installed on the refrigeration
appliance when it is delivered.
Connecting the refrigeration appli-
ance to the water supply
By this time, the installation niche
should already have been prepared so
that the refrigeration appliance needs
only to be pushed into it.
When doing so, make sure that the
stainless steel hose is not kinked or
damaged.
Position the refrigeration appliance
slightly in front of the installation
niche so that the stopcock can still be
accessed.
The stainless steel hose for the refriger-
ation appliance is ready for connec-
tion at the rear of the appliance.
Connect the stainless steel hose to
the stopcock.
Ensure that the threaded union is
properly connected and does not
leak.
Slowly open the water supply stop-
cock and check the whole water sys-
tem for leaks.
The appliance can now be installed in
the niche (see “Installing the refrigera-
tion appliance” in “Installation”).