Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Specifications for the mains water connection
- Building-in dimensions
- Dimensions of front panels
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture fronts
- Aligning the building-in niche
- Checking the installation niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the front panels
- Securing and aligning the furniture front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Mains water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Super cool and Super freeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Initial commissioning
63
Before using for the first time
Allow the refrigeration appliance to
stand for approx. 1hour before con-
necting it to the power supply.
This will prevent potential functional
problems with the refrigeration appli-
ance.
Packaging material
Remove all packaging material from
the inside of the appliance.
Always remove all packaging mater-
ial, including adhesive tape, before
switching on the refrigeration appli-
ance. The adhesive tape is difficult to
remove from cold surfaces.
Cleaning
Please refer to the relevant instruc-
tions in “Cleaning and care”.
Clean the inside of the appliance and
the accessories.
Choosing the right door assistant
(Push2open/Pull2open)
The door assistant helps you to open
the appliance doors.
You can choose between the two door
assistants Push2open and Pull2open (see
“Selecting additional settings – Switch-
ing on the Door assistant ”).
The default door assistant is Push2open.
Select the
Pull2open door assistant if your appli-
ance has front panels with handles.
Select the
Push2open door assistant if your refri-
geration appliance has front panels
without handles.