Operating instructions/Installation instructions

Selecting additional settings
75
Miele@home
Setting up Miele@home
The message Set up Miele@home only
appears if the refrigeration appliance
has not yet been connected to a WiFi
network.
 Connect your refrigeration appliance
as described in “Before using for the
first time”.
Deactivating Miele@home
 In Settings mode, use the
and sensor controls to se-
lectMiele@home and selectOK to
confirm your selection.
 Use the and sensor controls to
select Deactivate and select OK to
confirm your selection.
Deactivation successful will appear on the
display.
 Confirm the message with OK.
Your refrigeration appliance is now dis-
connected from your WiFi network.
The symbol will go out on the dis-
play.
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you will need to react-
ivate the connection.
 In Settings mode, use the
and sensor controls to se-
lectMiele@home and selectOK to
confirm your selection.
 Use the and sensor controls to
select Activate and select OK to con-
firm your selection.
Activation successful will appear on the
display.
 Confirm the message with OK.
If the WiFi connection is active, will
appear on the display.
Checking the WiFi connection status
 In Settings mode, use the
and sensor controls to se-
lectMiele@home and selectOK to
confirm your selection.
 Use the and sensor controls to
select Connection status and select OK
to confirm your selection.
Information about the WiFi connection
status will then appear on the display:
- connected: there is a strong con-
nection
- connected: there is an average
connection
- connected: there is a weak con-
nection
- : disconnected