Operating instructions/Installation instructions

Selecting additional settings
76
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your refrigeration appliance.
 In Settings mode, use the
and sensor controls to se-
lectMiele@home and selectOK to
confirm your selection.
 Use the and sensor controls to
select Set up again and select OK to
confirm your selection.
Reset configuration?will appear on the
display.
 Use the and sensor controls to
select Yes or No and select OK to
confirm your selection.
Resetting the network configuration
Reset the refrigeration appliance’s set-
tings to the default settings when dis-
posing of your refrigeration appliance,
selling it or putting a used refrigeration
appliance into operation. This will re-
set the network configuration so that
all personal data is deleted from the
refrigeration appliance. This will also
ensure that a previous owner is no
longer able to access the refrigeration
appliance.
 Reset the settings of the refrigeration
appliance as described in the chapter
“Resetting the settings to their default
settings”.
Switching off theDemo
mode
Demo mode allows the refrigeration
appliance to be presented in the
showroom without the cooling sys-
tem being switched on. This setting
is not needed for domestic use.
If Demo mode has been switched on
as a default setting, will show on the
display.
 In Settings mode, use the
and sensor controls to selectDemo
mode and selectOK to confirm your
selection.
Press OK for 4 seconds to deactivate will
appear on the display.
 Follow the instructions on the display.
The countdown Demo mode will deactiv-
ate in seconds will appear on the display.
Demo mode deactivated. Appliance cooling
switched on will appear on the display.
 Confirm the message with OK.
The main screen will appear on the dis-
play again.