Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Specifications for the mains water connection
- Building-in dimensions
- Dimensions of front panels
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture fronts
- Aligning the building-in niche
- Checking the installation niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the front panels
- Securing and aligning the furniture front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Mains water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Super cool and Super freeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Selecting additional settings
80
Switching the Holiday modeoff
In Settings mode, use the
and sensor controls to selectHoli-
day and selectOK to confirm your se-
lection.
Use the and sensor controls to
select Off and select OK to confirm
your selection.
The temperature you had set previously
is now displayed on the temperature
display for the fridge zone and the in-
terior lighting in the fridge zone will go
on again.
The symbol will disappear from the
temperature display for the fridge zone.
Switching Sabbath modeon
or off
The refrigeration appliance has a Sab-
bath mode to support the observance of
religious customs.
When Sabbath mode is switched on,
you cannot make any settings on your
refrigeration appliance.
Ensure that the appliance door is
properly closed, as visual and audible
alarms are switched off in Sabbath
mode.
In Settings mode, use the
and sensor controls to selectSab-
bath mode and selectOK to confirm
your selection.
Use the and sensor controls to
select On or Off and select OK to con-
firm your selection.
When Sabbath mode is switched on,
will appear on the display and the
display brightness will be reduced (the
display does not change when the ap-
pliance door is closed).
When Sabbath mode is switched on,
the following functions are switched off:
- Door assistant
(for furniture fronts without handles,
the appliance door will have to be
pulled from the bottom or side)
- Lighting
- All acoustic and visual signals
- Temperature display
- The SuperCool function
(if previously switched on)