Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Installation
- Location
- Installation notes
- Specifications for the mains water connection
- Building-in dimensions
- Dimensions of front panels
- Installing the appliance
- Before starting ...
- Tools required
- Weight of the furniture fronts
- Aligning the building-in niche
- Checking the installation niche
- Before installation
- Preparing the building-in niche
- Pushing the refrigeration appliance into the building-in niche
- Aligning the refrigeration appliance
- Securing the refrigeration appliance in the building-in niche
- Preparing to install the front panels
- Securing and aligning the furniture front
- Mounting the fixing brackets
- Securing the covers
- Installing the cover in a side-by-side combination
- Securing the plinth ventilation grille and plinth panel
- Limiting the opening angle of the appliance door
- Mains water connection
- Electrical connection
- Saving energy
- Guide to the appliance
- Accessories
- Initial commissioning
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Super cool and Super freeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Water filter
- Problem solving guide
- Noises
- Service
- EU Conformity declaration
- UK Conformity declaration
- Copyrights and Licences
Using Super cool and Super freeze
88
SuperCool function
The Super cool function can be used to
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).
Super cool is particularly recommended
for the rapid chilling of large amounts of
fresh food or drink.
Switching SuperCool on
Touch the sensor control to set the
temperature.
Use the and sensor controls to
select the temperature display of the
fridge zone and select OK to confirm
your selection.
Touch the sensor control to switch
the SuperCool function on.
The symbol will be highlighted in col-
our and the newly set temperature value
of 2°C will appear on the display.
Confirm the setting with OK or wait
approx. 8seconds after the last press
of the button. The setting will be
automatically adopted.
The symbol will light up on the tem-
perature display for the fridge zone.
The refrigeration appliance will now run
at maximum power.
Switching SuperCool off
Touch the sensor control to set the
temperature.
Use the and sensor controls to
select the temperature display of the
fridge zone and select OK to confirm
your selection.
The symbol will be highlighted in col-
our and the temperature value of 2°C
will be shown on the display.
Touch the sensor control to switch
the SuperCool function off.
The symbol will no longer be high-
lighted in colour and the previous tem-
perature setting will appear again on the
display.
Confirm the setting with OK or wait
approx. 8seconds after the last press
of the button. The setting will be
automatically adopted.
The symbol will disappear from the
temperature display for the fridge zone.
The refrigeration appliance will continue
running at normal power.
If you do not turn off the SuperCool
function, it will turn itself off automatic-
ally after approx. 6hours. The refrigera-
tion appliance will then run at normal
power again.
Tip: To save energy, the SuperCool
function should be switched off once
food and drinks are sufficiently chilled.