Operating instructions/Installation instructions

Adjusting the interior fittings
96
Removing the dividing panel (de-
pending on the model)
The dividing panel in the freezer basket
can be removed for cleaning:
The dividing panel is secured to the
freezer basket with brackets.
 Pull the freezer basket out as far as it
will go.
 To release the holders, use a suitable
object to turn the slots in the pegs to
a horizontal position(1.).
 Remove the pegs from the hold-
ers(2.).
 Pull the dividing panel upwards to re-
move it.
 To reinsert the dividing panel, place
the holders in an upright position and
position the dividing panel into the
holders so that you hear it click into
place.
 Insert the pegs into the holders and
use a suitable object to turn the slots
in the pegs into a vertical position.
 Push the freezer basket all the way
back in.
Removing the ice cube con-
tainer
The ice cube container can be removed
for cleaning:
 Open the lower appliance door as
wide as possible.
 Tilt the ice cube container forwards
and pull it up and out to remove it.
Ice cube production does not stop
when the ice cube container has
been removed. Ice cubes can fall
into the freezer basket underneath.
Only remove the ice cube container
for the shortest time possible or
switch off the ice cube maker before-
hand (see “Switching off the ice cube
maker” in ”Making ice cubes”).