Product Manual
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the Fridge-Freezer combination 8
- Before use 10
- Settings 11
- Temperature and door alarm 14
- Setting the temperature 15
- SmartFresh drawers 17
- Using the refrigerator efficiently 20
- Using the freezer efficiently 21
- SuperCool 23
- Ice cube maker 24
- Automatic defrost 25
- Adjusting the interior fittings 26
- Cleaning and care 30
- Water filter 35
- Lead free certificate 40
- Frequently asked questions 41
- Noises 48
- After sales service 49
- Caring for the environment 52
- Installation 53
- Dimensions 59
- Installing the appliance 63
- Plumbing 80
- Electrical connection 83
- RemoteVision (optional accessory) 84
- Contact details 87
Installation with partition using the
"Merging Kit"
The minimum thickness of the partition
is
5
/
8
" (16 mm).
If there is a partition with a thickness
from
5
/
8
" (16 mm) to 6
5
/
16
" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
The "Merging Kit" will also be needed.
The "Merging Kit" is available from
Miele.
Installation with partition without
using the "Merging Kit"
If there is a partition with a thickness of
more than 6
5
/
16
" (160 mm) between
the adjacent appliances, then each
appliance should be individually
installed within its own niche using the
mounting accessories included (the
"Merging Kit" is not necessary).
Side panels
If one side of the appliance is visible, a
side panel must be used.
The side panel must be firmly secured
to the wall, the floor and the overhead
furniture/fixtures before the appliance is
placed in the cavity.
The dimensions of the side panel are
taken from the opposite wall of the
installation space. During installation,
ensure that the cavity is square and the
measurements are correct.
Installation
57