Product Manual

Aligning the housing unit
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
–
The side panels of the housing must
be even.
–
The housing unit panels must be at
least 16 mm thick.
–
The plinth facing must be at least
13 mm thick (or preferably 19 mm).
Check the installation niche
To ensure a safe, trouble-free
installation and the best possible
cosmetic result, check to be sure
that the installation space complies
with the installation requirements.
^
Check the base (see "Installation").
^
Check the dimensions of the cavity.
^
Check that the cavity is square.
^
Check the location of the power
outlet.
^ Check the location of the water
connection (see "Plumbing").
^ Check that all furniture parts in the
vicinity of the appliance are securely
connected to the wall.
^ Check that the adjacent
furniture/fixtures do not collide with
the open door.
Before installation
,
Caution - the appliance is very
heavy. Use caution when unpacking
and opening the door, danger of
tipping.
^
To protect the base from damage
during installation, attach a hard
board, linoleum, etc., to the floor in
front of the intended installation
location.
^
Take the supplied accessories out of
the protective packaging.
Installing the appliance
64